Schneider Electric | EVlink P2/Wallbox G4 Smart- Configuration for ChargePilot

Modified on Tue, 29 Apr at 5:19 AM

Before starting the configuration, please check the charger firmware version complies with the latest compatible firmware version.

Connection to the charger

Local connection

Connect to the charger web interface

Direct connection to the charger
- For the first time login, or the station has a static IP-address, connect your laptop directly with the charger (stand-alone)
- Change the IP-address of your laptop’s Ethernet port to the same IP range
- Open your web browser and type in the default 192.168.0.102 or the configured charger IP-address
Indirect connection to the charger via a DHCP server
- Connect your Ethernet cable to the router which is also connected to the charger and the DHCP server
- Open your web browser and type in the charger IP-address

Open image-20210518-141330.png

Open image-20210518-141337.png

Network settings

Ethernet

Go to Configuration → Network
Automatically obtain IP address: ON

OCPP settings

Backend

Go to Configuration → Supervision
OCPP Mode: OCPP-J 1.6
WebSockets JSON OCPP URL of the Backend: ws://172.22.0.1:9000

OCPP ChargeBox ID

Serial number of the charger by default or according to the installation protocol

Open image-20210518-141358.png

Open OcPP.png

Other charger settings

Authorization settings

Go to Configuration → General Settings
Set the parameters:
- Station type: Supervised
- Authentication done by: Supervison

Autocharge/Free charging settings

When this function is activated, charger starts transaction either with the identifier predefined in the charger, or with the EV MAC address (Plug & Charge).

Go to Configuration → General Settings
Set the parameters:
- Authentication done by: Disable
Go to Configuration → Supervision
Set the parameters:
- Default User ID Tag can be set to e.g. our default tag PLUGANDCHARGE

Open image-20210518-141358.png

Open Autocharge disable.png

Open Autocharge_Supervision_plug_Charge.png

Offline behavior settings

Go to Configuration → General Settings
Authentication strategy when communication lost: Reject / Allow all badges (according to the site requirement)

It is recommanded to select “Allow all badges”

Energy management settings

Go to Energy Management
Set the parameters:
- Load balancing: Disabled
- Controlled by external system: Yes
Click the “Save and reboot” button

Open Bildschirmfoto 2021-08-19 um 13.48.32.png

Open image-20210518-142206.png