Schneider Electric | EVlink Pro AC - Configuration for ChargePilot

Modified on Tue, 29 Apr at 5:23 AM

Before starting the configuration, please check the charger firmware version complies with the latest compatible firmware version.

Connection to the charger
Local connectionConnect to the charger per appDownload the eSetup app on the smart phone
Start a commissioning session → select EV Chargers → select EVlink Pro AC
Turn on the bluetooth connection of the smart phone. The detected chargers will be shown in the app
Select the charger to be configured. For the first connection, it is required to set the password for the charger 
Open IMG_0659-20240529-075546.PNG
Open IMG_0643-20240529-075629.PNG
Network settings
EthernetGo to Configuration → Connectivity → Network settings
Mode for Ethernet configuration: DHCP (ON)
Click the “Save” button

OCPP settings
BackendGo to Configuration → Connectivity → Supervision
Supervision: ON
WebSockets JSON OCPP URL of the Backend: ws://172.22.0.1:9000
OCPP ChargeBox ID
Serial number of the charger by default or according to the installation protocol
Click the “Save” button

Connection to the charger
Local connection Connect to the charger per app Download the eSetup app on the smart phone Start a commissioning session → select EV Chargers → select EVlink Pro AC Turn on the bluetooth connection of the smart phone. The detected chargers will be shown in the app Select the charger to be configured. For the first connection, it is required to set the password for the charger	Open IMG_0659-20240529-075546.PNG Open IMG_0643-20240529-075629.PNG
Network settings
Ethernet Go to Configuration → Connectivity → Network settings Mode for Ethernet configuration: DHCP (ON) Click the “Save” button
OCPP settings
Backend Go to Configuration → Connectivity → Supervision Supervision: ON WebSockets JSON OCPP URL of the Backend: ws://172.22.0.1:9000 OCPP ChargeBox ID Serial number of the charger by default or according to the installation protocol Click the “Save” button