Parameters of Charger Configuration
Category | Required | Comment |
Smart Charging | Activate, via OCPP 1.6 JSON | Allow TxProfiles and TxDefaultProfiles |
Fix IP address | No fix address to be set! | Instead, each charger shall allow our DHCP to provide an IP address |
Internal DHCP Server (Charger) | inactive | If possible / necessary to determine for each port separate, deactivate DHCP server at least for port 9000 |
OCPP endpoint | ws://172.22.0.1:9000 | 172.22.0.1: IP adress Local Controller 9000: Network software port |
Device ID | – to be chosen – | In our Installation Protocol, please inform us on your settings for the Device ID (Mostly default: Device Serial Number) |
(optional) Authorization | Authorization via Backend:
| RFID: Delivered Cards / Fobs already activated Free Charging: Inform us on the tag e.g. PLUGANDCHARGE MAC Adress: DC Charging only |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article