Bender | ebee-Berlin - Configuration for ChargePilot

Modified on Tue, 29 Apr at 7:30 AM

Before starting the configuration, please check the charger firmware version complies with the latest compatible firmware version.

Connection to the charger
Local connection Go to the charger web interface If you log in for the first time or use the station neither with controller nor dhcp server (stand-alone), connect your laptop directly with the wallbox and enter http://192.168.123.123/operator in your web browser to reach the web interface If the station is already integrated to a local controller, connect via switch or port forwarding Run network-scan to identify the right IP-address for the selected charge point Enter charger´s IP-address in your web browser to connect to web UI Login Data: Username: operator PW: aquired from the vendor or customer For chargers with double connectors The master controller and the slave controller share the same IP-address but different ports. Typing <charger_ip>:81 in the web browser can access the general settings page (settings for both connectors) Typing <charger_ip>:82 in the web browser can access the connector 2 (slave) settings	Open WW_loing_EN.png
Network settings
Ethernet Navigate to Network → LAN Set Mode for Ethernet-configuration to Automatic (DHCP)	Open WW_Network_EN.png
OCPP settings
Backend Navigate to Backend → OCPP Configure the Parameters as follows: ChargePointID: according to the protocol OCPP Modus: OCPP-J 1.6 WebSocket JSON OCPP URL: ws://172.22.0.1:9000	Open WW_Backend_correct_adress_EN.png
Other charger settings
Authorization settings Navigate to Authorization Free Charing: Off	Open WW_Authoriz_EN.png
Autocharge/Free charging settings When this function is activated, charger starts transaction either with the identifier predefined in the charger, or with the EV MAC address (Plug & Charge). Autocharge: On EVCCID or EV's MAC address prefix for OCPP authorization: P&C (max. 8 characters allowed)	Open WW_Autocharge_EN_Bender.png